top of page
Raidworx RSR
(Pronounced: "RAZOR")
 
* WE HIGHLY RECOMMEND A 50M/YD OR 100M/YD ZERO IF USING OUR RISER SYSTEM*
 
* RSRs WILL WORK WITH UNTIY FTC MOUNTS, JUST BE AWARE THAT THERE MAY BE A SLIGHT SHADOW IN THE LOWER PART OF THE MAGNIFIER IF NOT USING OUR UNITY ADAPTER* 
 
  • Designed for a more heads up, natural shooting position while achieving a ballistically flatter trajectory with most common load data.
  • Higher than the "standard" 2.26", the RSR places the optic 2.76" above top rail (measured with EXPS/T1/T2 line of optics). Roughly 2.26" height with xps variants.
  • Enhanced ability to passive aim with Night Vision systems.
  • User friendly for shooting with Gas Mask, SCBA, CBRN systems.
  • Inset T-25 driver bit in battery cap of both riser systems for emergency tightening or mounting of riser to rifle.
  • Watertight spare battery (CR123A/CR2032) storage compartment inside of riser on both Aimpoint Micro and Picatinny variants. (Periodically check your spare battery to ensure it is still in good condition).
  • Both variants made from 7075T6 Aluminum and 4140 Steel with USA made hardware.
  • Clamping bars on both models are 4140 steel with nitride coating for corrosion protection.
  • All hardware is made in America and is nitride coated.
  • Type 3 Hard Coat Anodizing.
  • Aimpoint Micro Riser has the ability to use standard iron sights and co witness through the riser body.
  • Picatinny Riser Weight: .23lbs/3.3oz. (without CR123A battery in riser).
  • Aimpoint Micro Riser Weight: .24lbs/3.7oz. (without CR2032 battery in riser).
  • All Raidworx products are backed by our limited lifetime warranty. 
 
 
 
 

Raidworx RSR (Reddot Storage Riser)

$139.95Price
Color
Quantity
    • Riser T25 mounting screws should have a small amount of "loctite"/"vibratite" applied to them then torqued to 35inch/lbs.

  • “FDE” is a term we use to reference a variance of colors that include tan, brown, bronze, earth, and other shades that takes place during Type III Hardcoat anodizing process. The final finish can vary from part to part (even parts done in the same batch). Our “FDE” product may vary from other parts from other companies, and may vary from the photos shown on Raidworx website. We do our best to keep our anodizing variance within our strict QC standards. 

bottom of page